![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657226.webp)
GBC StreamWire
7/23/2020
Repairs/Adjustments
4-129
REP 6.8 Closer Chain Replacement Procedure
Use this procedure to remove and install the Closer Chain.
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Do REP 6.1
4. Do REP 6.4
5. Place the closer upside down on a work surface.
6. Remove the tensioner assembly by removing the screws (2)
securing it to the Closer.
7. Rotate the chain until the master link is accessible.
8. Remove the master link by first removing the clip, then the outer
plate, followed by the pin link plate.
9. Wrap the new length of chain around the sprockets and place it on
the teeth so that the chain is tight on the bottom and loose on the
top (in the closers current upside down orientation).
10. Install the master link by reversing the steps in step 8.
11. Reinstall the tensioner assembly. Position it so that the chain has
approximately 5mm of give.
12. Do REP 6.1
Module.
13. Connect the Power Cord.
14. Power ON the eWire.
15. Run sample books and examine the roundness of the closed
elements. Refer to ADJ
Clip
Outer
Plate
Pin
Link
Summary of Contents for StreamWire
