![background image](http://html1.mh-extra.com/html/gbc/streamwire/streamwire_service-manual_3988657416.webp)
GBC StreamWire
07/23/2020
General Procedures and Information
6-79
GP 6.18 Solenoid Cleaning and Inspection
Warning
:
Make sure you disconnect the machine from its power source
before cleaning. Failure to observe this warning could result in death or
serious Injury.
See Section 0, page vii for other languages.
Do the following to inspect and clean the Solenoids every 1 million
sheets.
8. Clean the solenoid and surrounding area with a vacuum cleaner and
canned air.
2. Make sure the solenoid is clean and dry.
3. Inspect for dirt or obstructions, wear or a damaged spring.
4. Inspect and ensure the Solenoid linkage moves freely. Press linkage
down and release. Linkage should return.
5. If necessary, refer to GP 6.3.2 to test the function of the Solenoid.
Note:
Do not apply lubricants to the solenoid or linkage.
GP 6.19 Drawer Slide Rails Cleaning
Do this procedure to clean the Drawer Slides that are used with the
Element Feeder and Book Tray.
Warning
:
Make sure you disconnect the machine from its power source
before cleaning. Failure to observe this warning could result in death or
serious Injury.
See Section 0, page vii for other languages.
Preventative Maintenance:
Do this every 1 million sheets.
Procedure
1. Use a can of compressed air to remove dust from the alignment
carriage rails. The carriage can be moved back and forth on the rails
to clean the entire surface. Alternately, a soft cloth and alcohol can be
used.
2. If necessary, the drawer can be removed from the rails by releasing
the plastic catch on the side of the rail.
3. Slide the drawer in and out to ensure the drawer moves freely with no
obstructions or excessive drag.
Important Note: DO NOT use any lubricant on the rails
Summary of Contents for StreamWire
