Installation Instructions
03/26/2019
GBC StreamWire
8-4
8.3. Remove the Packing Materials
Do the following to remove all packing materials from the eWire.
1. Clear the space needed for the eWire.
2. Move the Shipping Container into position near where you will install
the eWire
3. Remove the plastic shrink-wrap from the container and remove the
packing Straps.
4. Remove the wooden ramp from the top of the shipping container. Do
not discard the wooden ramp. It will be needed later to remove the
eWire from the pallet.
5. Remove any additional packing from inside the top of the box.
6. Remove cardboard outer package by lifting it straight up off the
eWire. Take care not to scrape the sides of the machine. Note: Two
people should work together to lift the outer packaging, which is one
large piece.
7. Remove the inner shrink wrap covering the eWire.
8. Open the element feeder door on the front left of the machine. Locate
the shipping bracket at the bottom of the frame. Remove the M6
screw and remove the clamp plate from bracket. Remove the 2 x M10
bolts securing the support bracket to the pallet and remove the
shipping bracket from the eWire.
9. Repeat this procedure for the bracket located under the electrical
panel at the rear of the machine.
10. Locate the shipping bracket on the left side of the machine. Remove
the 3 x M6 screws securing the side bracket to the eWire. Remove
the 5 x M10 bolts securing the shipping bracket to the pallet. Slide the
bracket out from under the eWire and remove it.
11. Repeat for the opposite side bracket.
Summary of Contents for StreamWire
