GBC StreamWire
7/23/2020
Repairs/Adjustments
4-203
ADJ 1.19 Top Cover Latch Adjustment
Adjust the top cover latch to ensure the gap between the upper and lower
transport is set correctly. If the gap is too large, rollers may not have the
appropriate nip force.
Inspection Procedure
1) You can verify if the gap between the upper and lower bypass is too
large by pressing down on the top cover. If the top cover moves
significantly when you press on it, the gap is likely too large.
2) You can also verify if the top cover adjustment is off by pressing down
on the top cover during operation. If jams no longer occur while
pressing on the top cover, the latch likely needs to be adjusted.
Adjustment Procedure
1) Remove the top cover by following the REP 1.1 for Top Cover
Removal.
2) Locate the 4 Screw securing the latch assembly and loosen the
screws. This will allow the latch and cover to move freely.
3) Press down on the top of the frame until the upper and lower bypass
panels are in contact.
4) Without letting go of the frame, lift the Latch Assembly until the hook
of the latch is in contact with the latch pin. Tighten the 4 screws to
secure the latch in this position. This may require 2 people, or you
can use a weight to press down on the top of the assembly.
5) After adjusting it, repeat the steps in the Inspection Procedure to
ensure that the latch is set correctly. If necessary, repeat steps 2 thru
4.
6) Replace the Top Cover and resume operation.
Summary of Contents for StreamWire
