– 1 –
5.8 GHz Digital Cordless Answering System
Model No.
KX-TG5480
Quick Set-Up Guide
Please read the Operating Instructions for further details.
PQQW13666ZA
SM0305SF0
Step 1
Setting Up the Base Unit
•
USE ONLY WITH Panasonic AC ADAPTOR PQLV1.
•
Use only the telephone line cord included in the unit.
•
Make sure that the AC adaptor and telephone line cords are
plugged into the unit properly. Refer to pages 11 and 12 in the Operating Instructions.
To connect to 2 single-line telephone jacks (RJ11C),
refer to page 13 in the Operating Instructions.
Step 2
Setting Up the Handset
Install the battery.
Insert the battery (
1
), and
press it down until it snaps
into the compartment (
2
).
Close the cover.
Charge the battery
for 6 hours before initial use.
•
The unit beeps once, the CHARGE indicator
lights and “
Charging
” is displayed.
•
When the battery is fully charged, “
Charge
completed
” is displayed if there are no new
calls in the Caller List.
4-Wire
Telephone Line
Cord with
GREEN Plugs
AC Adaptor
To connect to a 2-line telephone jack
Fasten the AC adaptor
cord to prevent it from
being disconnected.
2-Line
Telephone
Jack
(RJ14C)
1
2
CHARGE Indicator
TG5480_QG(e).fm Page 1 Tuesday, March 8, 2005 5:17 PM
