background image

READ THIS BOOK

This operator’s book has important information for the
use and safe operation of this machine.  Read this book
carefully before starting the machine.  Keep this book
and tell all operators to read the book.  If you do not
follow the instructions, you can cause an injury or dam-
age equipment, furniture or buildings.

For new books write to:

 

Pacific

2259 South Sheridan Road
Muskegon, MI  49442

Carefully inspect all components to ensure that there is
no concealed freight damage.  If such damage is dis-
covered, file a “CONCEALED DAMAGE REPORT” im-
mediately with the delivering carrier.

The contents of this manual are based on the latest
product information available at the time of publica-
tion.  

Pacific 

reserves the right to make changes or

improvements to its machines without notice.

FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:

MODEL

_______________________________

SERIAL NUMBER

______________________

PART NUMBER _________________________

DATE PURCHASED ____________________

                    OPERATING & MAINTENANCE

INTRODUCTION                                            INSTRUCTIONS

UHS BURNISHER

FURY 1500DCP

Parts Manual

Summary of Contents for FURY 1500DCP









Reviews: