Fuji Xerox ApeosPort-II C3300, User Manual

Page: 551 / 635

Stapler Faults
549
Problem Solving
15
6
Remove the jammed staples (1),
and return the metal part pulled up
in step 5 to its original position (2).
7
Hold the orange lever to push the
staple cartridge into the machine
until you hear it click into place.
8
Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.
If the staples cannot be removed after carrying out the above procedures, contact our
Customer Support Center.
Staple Jams in the Booklet Staple Cartridge (For C Finisher with Booklet
Maker)
The following describes how to clear staple jams in the booklet staple cartridge when
the C Finisher with Booklet Maker (optional) is installed.
1
Make sure that the machine has
stopped, and open the front cover
of the finisher.
2
While pressing the levers R2 and
R3 to the right, pull out the unit.
1
2
Orange lever
R2
R3