Fuji Xerox ApeosPort-II C3300, User Manual

Page: 308 / 635

10 System Settings
306
System Settings
10
„ Use Closest Size
Replaces with the closest paper size to that selected, and prints. If necessary, the printing is
automatically reduced in size.
Note • If there is a client specification, the client specification takes precedence.
„ Select Tray 5 (Bypass)
Replaces with the paper in the Tray 5 (Bypass).
Paper Type Mismatch
Set the action to be taken when the paper type loaded in the paper tray does not match that
specified.
„ Print
Prints with the paper loaded in the tray.
„
Display Confirmation Screen
A confirmation screen appears to show procedures.
„ Display Paper Supply Screen
The [Paper Supply] screen appears to change the paper type of the selected tray.
Unregistered Forms
Set whether to print a job or not if a form specified for printing in a form data file (overlay
printing) is not registered on the machine. If you specify [Print], since the specified form is not
present, only the data is printed.
This setting is added to the print settings menu when there is a print specification from the
host computer.
Print User ID
When printing using a print driver, specify whether to print user identification information on
paper. The first 64 letters of the user information is printed.
Select a position to print from [Top Left], [Top Right], [Bottom Left], and [Bottom Right].
Note •
To use the Print User ID feature, the user ID must be set on the print driver
beforehand. For more information, refer to the print driver's online help.
•
When user authentication information is not available, "Unknown User" is printed.
Banner Sheet
Select whether to output banner sheets to separate different outputs.
A user name and document name are printed on a banner sheet.
Note • Even if the stapler feature is enabled, banner sheets are not stapled.
• On a print job from a Macintosh, the document name does not appear on the banner sheet.
• When printed, banner sheets are counted by meter.
„ Off
Does not print banner sheets.
„ Start Sheet
Prints a banner sheet before a print job.
„ End Sheet
Prints a banner sheet after a print job.
„ Start Sheet & End Sheet
Prints a banner sheet before and after a print job.
Banner Sheet Tray
Set the paper tray used for banner sheets.
Select from [Tray 1] to [Tray 4].