Fuji Xerox ApeosPort-II C3300, User Manual

Page: 505 / 635

Error Code
503
Problem Solving
15
027-726
O [Cause] The status of the application interface destination
(ApeosWare Flow Service) is unknown.
[Remedy] Check whether ApeosWare Flow Service operates
correctly. When it is operating correctly, check the log.
027-727
O [Cause] A parameter is illegal during an application interface.
[Remedy] Try to process the job flow again.
027-728
O [Cause] The number of files that are to be sent to external services
exceeded the maximum number.
[Remedy] Reduce the number of files, and send them again.
027-737
O O [Cause] An error occurred while reading data from the job template
pool server.
[Remedy] Check to see whether you have privileges for the directory
which stores the job template.
027-739
O O [Cause] Unable to find the specified job template server.
[Remedy] Check the path name of the job template server.
027-740 O O [Cause] Unable to login to the job template pool server.
[Remedy] Check the login user name and password.
027-741
O O [Cause] Unable to connect to the job template pool server.
[Remedy] Ask the network administrator to check the network and
server environments.
027-742
O O [Cause] Unable to store job template due to insufficient hard disk
space.
[Remedy] Remove unnecessary data from the hard disk to increase
free disk space.
027-743
O O [Cause] The specified job template pool server is incorrect.
[Remedy] Check the settings of the job template server.
027-744
O O [Cause] The domain name of the job template server has a
problem.
[Remedy] Make sure that the DNS server connection and the domain
name have been registered to the DNS server.
027-745
O O [Cause] The address of the DNS server has not been registered on
the machine.
[Remedy] Either register the address of the DNS server on the
machine, or set the address of the job template server with
its IP address.
027-746
O O [Cause] The protocol settings on the job template pool server are
incorrect.
[Remedy] Set up the correct port.
027-750
O [Cause] Attempted to give a fax/print/iFax command to the scan
document.
[Remedy] Fax/print/iFax features are unavailable for scan
documents. Set the job flow correctly.
027-751 O [Cause] An error occurred during job flow processing.
[Remedy] Check the settings of the job flow.
Error Code
Category
Cause and Remedy
C P F S M O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.