Fuji Xerox ApeosPort-II C3300, User Manual

Page: 130 / 635

4 Fax
128
Fa
x
4
„ Text
Select this item when transmitting a document that contains only text.
„ Photo & Text
Select this item when transmitting a document that contains both text and photos. The
machine automatically distinguishes the text and photo areas and sets the appropriate
image quality for each area of the document.
„
Photo
Select this item when transmitting documents that contain only photos.
Note • Stripes, etc. may appear in the photo image sections if a setting such as scanning at a
reduced size was specified.
Resolution (Specifying the Scanning Resolution)
You can set the resolution for the documents to be scanned.
Note • The [Resolution] can be set individually for each address number. For information on how to
register address numbers, refer to "Address Book (Address Number)" (P.334).
• The machine scans a document at the specified resolution, but if a machine of the recipient
does not support the resolution, the machine automatically changes the resolution to one
supported by the recipient's machine and there is a corresponding loss in quality.
• The higher the resolution, the lower the transmission speed. Usually, we recommend using
[Superfine (400dpi)] or lower.
1
Select the resolution.
„ Standard
Select this item when transmitting documents with easily legible text.
(Approx. 200 x 100 pels/25.4 mm)
„ Fine
Select this item when transmitting documents with small text and/or detailed images.
(Approx. 200 x 200 pels/25.4 mm)
„ Superfine (400dpi)
Select this item when transmitting documents with extremely fine text and/or images.
(400 x 400 pels/25.4 mm)
„ Superfine (600dpi)
Select this item when transmitting documents with extremely fine text and/or images.
(600 x 600 pels/25.4 mm)