Fuji Xerox ApeosPort-II C3300, User Manual

Page: 78 / 635

3 Copy
76
Copy
3
[Image Shift - Side 2] Screen
You can set the image shift of Side 2.
1
Select any item.
„ No Shift
The position of the document image is not shifted.
„ Auto Center
The center of the document is shifted to match the center of the paper.
When adjusting the margin amount, set the top and bottom, and left and right values
within the range from 0 to 50 mm in 1 mm increments.
„ Corner Shift
The document image is shifted to the edges or corners of the paper. You can select
from 8 shift directions.
When adjusting the margin amount, set the top and bottom, and left and right values
within the range from 0 to 50 mm in 1 mm increments.
„ Variable Shift
You can set the margin amount. Set the top and bottom, and left and right values within
the range from 0 to 50 mm in 1 mm increments.
Image Rotation (Making Copies with the Image Rotated Vertically or
Horizontally)
If the orientation of the paper currently loaded in the tray differs from that of the
document loaded, the machine automatically rotates the document image to make
copies with the document and paper orientations matched. You can also select where
to use as a reference for image rotation if documents are of mixed orientations.
The image rotation feature can only be used to make copies to paper of A4 and 8.5 x
11 inches or smaller.
1
Select [Image Rotation].
2
Select any item.
„ Off
Copies of documents are made as they are, even if they are orientated differently.
„ Always On
The document image is automatically rotated so that the orientation of the document
matches that of the paper.
„ On during Auto
The document image is automatically rotated so that the orientation of the document
matches that of the paper when [Auto %] of [Reduce/Enlarge] or [Auto Paper] of [Paper
Supply] is selected.