Fuji Xerox ApeosPort-II C3300, User Manual

Page: 429 / 635

Cleaning the Machine
427
M
a
in
te
na
nc
e
14
7
Hold the center section of the
removed waste toner container,
and adjust the center position to
insert the container into the
machine.
8
Hold the left and right orange
levers to close the black cover.
9
Return the cleaning stick to the rear
face of the front cover.
10
Close the front cover.
Note • A message will be displayed and the machine will not operate if the front cover is not
completely closed.
Cleaning the Document Cover and Document Glass
If the document cover and document glass are dirty, streaks or smears may appear on
copies and the machine may not properly detect document sizes.
To ensure clean copies at all times, clean the document feeder roller about once a
month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying.
1
Wipe the document cover with a
soft cloth moistened with water to
remove any dirt and then wipe it
with a soft, dry cloth.
Important • Do not use cleaning agents
other than water or neutral
detergent.
Note • If dirt does not come off easily,
gently wipe it with a soft cloth
moistened with a small
amount of neutral detergent.