Fuji Xerox ApeosPort-II C3300, User Manual

Page: 510 / 635

15 Problem Solving
508
Problem Solving
15
034-506
O [Cause] The destination machine does not have the remote copy
feature (for printing the multiple sets of a received
document).
[Remedy] Check if the destination machine has the remote copy
feature.
034-507
O [Cause] The specified password is not identical with the ID number
of the destination machine.
[Remedy] Check the password and the phone number.
The destination machine may be set not to send its ID
number. Check the setting of the destination machine.
This error code also appears when polling is rejected.
034-508
034-509
034-510 O [Cause] An error occurred during fax transmission.
[Remedy] Check the settings and the phone number, and send the
fax again. If the machine conditions are not improved by
performing the relevant remedy, contact our Customer
Support Center.
034-511 O [Cause] Unable to send with the Relay Broadcast feature.
[Remedy]Check if Relay Broadcast is correctly set for the
abbreviated number.
If the registered number is incorrect, modify it. Check also
the abbreviated number registered in the relay station.
For information on Relay Broadcast, refer to "Relay Broadcast
(Transmitting Documents Through a Relay Station)" (P.152). For
information on Remote Relay Broadcast, refer to "Remote Relay Broadcast
(Performing Relay Broadcast to Remote Locations)" (P.156).
034-512
O [Cause] An infinite loop was detected on the remote relay
broadcast.
[Remedy] Check the abbreviated number of the relay broadcast.
Check also the abbreviated number registered in the relay
station.
For information on Remote Relay Broadcast, refer to "Remote Relay
Broadcast (Performing Relay Broadcast to Remote Locations)" (P.156).
034-515
O [Cause] The destination machine has a problem.
[Remedy] Check the conditions of the destination machine.
034-519 O [Cause] The number of destinations specified for the broadcast
transmission exceeded the upper limit.
[Remedy] Wait until the waiting jobs decrease, or reduce the number
of destinations, and try again.
034-520 O [Cause] The number of waiting jobs exceeded the upper limit.
[Remedy] Wait until the waiting jobs decrease, and try again.
034-521
O [Cause] An error occurred while faxing.
[Remedy] Turn off and on the machine. If the error persists, contact
our Customer Support Center.
034-522
O [Cause] There is no line available for the manual communication.
[Remedy] Wait until the job in communication is completed, and try
again.
034-523
O [Cause] Unable to accept jobs.
[Remedy] Retry after waiting for a while.
Error Code
Category
Cause and Remedy
C P F S M O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.