Fuji Xerox ApeosPort-II C3300, User Manual

Page: 58 / 635

3 Copy
56
Copy
3
Copy
You can set the basic features on the [Copy] screen. The following shows the reference
section for each feature.
Reduce/Enlarge (Making Enlarged/Reduced Copies) ................................................................56
Paper Supply (Selecting the Paper for Copying) ........................................................................58
Output Color (Selecting the Color to Copy) ...............................................................................60
Image Shift (Shifting the Image Copy Position).........................................................................63
Edge Erase (Erasing Edges and Margin Shadows in the Document) .........................................63
Lighten/Darken (Adjusting the Copy Density)...........................................................................63
1
On the [All Services] screen, select
[Copy].
2
Select features on the [Copy]
screen that appears first.
Reduce/Enlarge (Making Enlarged/Reduced Copies)
You can select a ratio to make enlarged or reduced copies.
1
Select the copy ratio from [Reduce/
Enlarge].
„ 100%
Copies are made at the same size as the original document.
„ Auto %
The copy ratio is automatically set based upon the document and paper sizes specified
in [Paper Supply], and the document is copied to fit in the specified paper size.
Note • If you select [Auto %], specify a value other than [Auto Paper] for [Paper Supply].
„ Ratio (3rd to 4th buttons)
Select from preset ratios.
You can change the indicated ratios. For information on the settings, refer to "Reduce/Enlarge - Buttons
3 and 4" (P.293).
„ More...
Displays the [Reduce/Enlarge] screen.
Refer to "When [Proportional %] is Selected" (P.57), "When [Independent X-Y%] is Selected" (P.57),
or "When [Calculator %] is Selected" (P.58).