Fuji Xerox ApeosPort-II C3300 User Manual Download Page 514

Page: 514 / 635

15 Problem Solving

512

Problem Solving

034-797
034-798
034-799

[Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the error persists, contact

our Customer Support Center.

035-700

[Cause] An error occurred during fax transmission.
[Remedy] Try to send the fax again. If the problem persists, contact

our Customer Support Center.

035-701

Refer to 034-728.

035-702
035-703

[Cause] The communication was interrupted on the destination

machine. This error is not due to this machine.

[Remedy] Call the destination to check the condition of the

destination machine, and try again.

035-704

[Cause] The fax was sent using a feature (such as Polling), but the

destination machine does not have the feature.

[Remedy] Make a phone call to the recipient to check the destination

machine features.

035-705
035-706

[Cause] The destination machine may have a problem.
[Remedy] Call the destination to check the condition of the machine,

and try again.

035-707

[Cause] The received document has an incorrect or no password.
[Remedy] No operation is necessary. This error is just to notify that

the machine received such a document.

035-708
035-709
035-710
035-711
035-712

[Cause] The destination machine may have a problem.
[Remedy] Call the destination to check the condition of the machine,

and try again.

035-713

[Cause] The destination machine may have a problem.
[Remedy] Call the destination to check the condition of the machine,

and try again.

035-714

Refer to 003-702.

035-715

Refer to 034-507.

035-716
035-717
035-718
035-719

[Cause] Communication error
[Remedy] Ask the sender to try again.

Error Code

Category

Cause and Remedy

C P F S M O

* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is

printed on the label or card attached on the machine.

Summary of Contents for ApeosPort-II C3300




























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-II C3300

Reviews:

Related manuals for ApeosPort-II C3300

Brands by name

Popular brands

Fuji Xerox ApeosPort-II C3300, User Manual

Search results

Summary of Contents for ApeosPort-II C3300

Reviews:

Related manuals for ApeosPort-II C3300

Brands by name

Popular brands