Fuji Xerox ApeosPort-II C3300, User Manual

Page: 161 / 635

Broadcast
159
Fa
x
4
Register the following information in the address numbers of the primary relay station
and the secondary relay station in advance.
Important • When using the F Code method for remote Relay Broadcast Send, the primary relay stations
and secondary relay stations must support our F Code method and be equipped with the
Relay Broadcast feature.
Note • When performing Relay Broadcast Send with machines of this model, we recommend using
the fax signal method.
* When the Speed Dial Extension Kit is installed, it will be 001 to 999.
When using the machine as a relay station, the F Code that is transmitted to the
initiating station is as follows.
„ Relay Broadcast Send
Number of digits of primary relay station
1: For primary relay station IDs and address numbers that are 2 digits
2: For primary relay station IDs and address numbers that are 3 digits
„ Print Directive
Existence of printing at the primary relay station
1: Printing at the primary relay station
0: No printing at the primary relay station
Where Contents
Primary
Relay
Station Assign the initiating station either to an address number from 001 to 500* (when
the specification method for the initiating station is 3 digits in F Code) or to 001
to 099 (when the specification method for the initiating station is 2 digits in F
Code). Then, set Relay Station Setup of the address number to [On].
Assign the secondary relay station either to an address number from 001 to
500* (when the specification method for the initiating station is 3 digits in F
Code) or to 001 to 099 (when the specification method for the initiating station is
2 digits in F Code).
z
As the relay station ID, assign the last two digits of the Address Number for
the primary relay station that is registered to the secondary relay station.
z
As the broadcast recipients, assign the Address Number for the relay
recipients that have been registered to the secondary relay station.
Secondary
Relay
Station Assign the primary relay station to the same address number as that of the
initiating station registered at the primary relay station, and set Relay Station
Setup of the address number to [On].
Assign the relay recipients either to an address number from 001 to 500* (when
the specification method for the initiating station is 3 digits in F Code) or to 001
to 099 (when the specification method for the initiating station is 2 digits in F
Code).
Relay Broadcast
Send Print
Directive Primary
Relay
Station ID Address
Number Address
Number Address
Number
....
Up to 20 digits