Fuji Xerox ApeosPort-II C3300, User Manual

Page: 301 / 635

Copy Mode Settings
299
System Settings
10
„ Same as Side 1
Prints in the same position as the front side.
Page Number Position (Side 2)
When an annotation page is specified for 2 sided copying, set where to place the page
printed on the reverse side.
„ Opposite to Side 1
Prints in a position symmetrically opposite to the front side.
„ Same as Side 1
Prints in the same position as the front side.
Original Size Defaults
Set the original sizes that appear in [Original Size] in the [Layout Adjustment] screen.
Original sizes can be assigned to the buttons other than [Auto Size Detect].
When frequently making copies of non-standard size originals, by presetting the non-
standard size, you can save time to enter the original size each time a copy is made.
„ A/B Series Size
You can select from sizes of A and B series.
„ Inch Size
You can select from sizes of inch series.
„ Others
You can select from other sizes.
„ Variable Size
You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.
Reduce/Enlarge Presets
Set the magnifications shown in [Preset %], in [Reduce/Enlarge] in the [Copy] screen.
You can assign any magnification to the R/E Preset buttons.
Custom Colors
Set the custom colors used for [Single Color] and [Dual Color] in [Output Color].
You can assign custom colors with yellow (0 to 100%), magenta (0 to 100%), and cyan
(0 to 100%) to each of custom color buttons 1 to 6.
Note • Adjust so that the total of yellow, magenta, and cyan does not exceed 240%.
Annotation - Create Stamps
Register text to be printed with [Stamp] under [Annotation]. You can enter up to 32
characters.
For information about how to enter characters, refer to Entering Text (P.271).