Fuji Xerox ApeosPort-II C3300, User Manual

Page: 565 / 635

Printable Area
563
Ap
pe
nd
ix
16
Printable Area
The area on paper that can be printed is as follows.
Standard Printable Area
The standard printable area is an area on paper excluding the 4.1 mm margins on all
four edges of paper. For SRA3 (320 mm width), the printable area is an area on paper
excluding the 11.5 mm left and right margins. The actual printable area, however, may
vary depending on the printer (plotter) control language.
Extended Printable Area
With the extended printable area setting, the printable area can be extended to
302 × 476.6 mm at a maximum. The un-printable area, however, may vary depending
on the size of paper.
Note • To extend the print area, change the PCL print driver or the [Print Area] setting on the touch
screen.
For the setting method on the printer driver, refer to the online help provided for the print driver. For
more about the setting on the control panel, refer to "Print Area" (P.305).
„
When the paper width
is less than 12 inches
„
When the paper width
is 12.6 inches
„
When the paper width
is 12.6 inches (SRA3
(320 mm width))