Ceragon FibeAir IP-20C User Manual Download

Page: 566 / 597

FibeAir IP-20C/S/E

User Guide

Ceragon Proprietary and Confidential

Page 566 of 597

Pin no.

Description

BI_DD- (Bi-directional pair -D)

23.7.3

One or two DC ports, depending on the PoE Injector model:
Two models of the PoE Injector are available:



PoE_Inj_AO_2DC_24V_48V – Includes two DC power ports with power
input ranges of ±(18-60)V each.



PoE_Inj_AO – Includes one DC power port (DC Power Port #1), with a
power input range of ±(40-60)V.

These ports are UL-60950 compliant, with a 2-pin connector.

23.8

PoE Injector LEDs



PWR1 (Bi-color LED)

Green – Power available on PWR1 DC input

Off – No power is available on PWR1 DC input.



PWR2 (Bi-color LED)

Green – Power available on PWR2 DC input,

Off – No power is available on PWR2 DC input.



PoE (Tri -color LED)

Orange – No load is detected

Green – Providing in-line power

Blinking Red – Invalid/over-load

Off – no power to the injector unit.

23.8.1

Radio LED

The Link LED is a three-color LED that indicates the status of the radio link:



Off – The radio is off.



Green - The power is on, and all carriers are operational (up).



Yellow - A signal degrade condition exists in at least one carrier.



Red - A loss of frame (LOF) or excessive BER condition exists in at least
one carrier.

Summary of Contents for FibeAir IP-20C





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FibeAir IP-20C

Reviews:

Related manuals for FibeAir IP-20C

Brands by name

Popular brands

Ceragon FibeAir IP-20C, User Manual

Search results

Summary of Contents for FibeAir IP-20C

Reviews:

Related manuals for FibeAir IP-20C

Brands by name

Popular brands