FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 121 of 597
4.7.5
Importing a Configuration File
You can import a saved configuration file from a PC or laptop to one of the
system's three restore points.
To import a configuration file:
1 Verify that you have followed all the steps in Setting the Configuration
2 Select Platform > Configuration > Configuration Management. The
Configuration Management page opens (Figure 80).
3 In the File Number field, select the restore point to which you want to
import the file.
4 Click Apply to save your settings.
5 Click Import. The import begins. You can view the status of the import in
the File Transfer status field in the Export/Import file status section.
Possible values are:
Ready – The default value, which appears when no import or export is
in progress.
File-in-Transfer – The file import is in progress.
If an error occurs during the import or export, an appropriate error
message is displayed in this field.
When the import or export is complete, one of the following status indications
appears:
Succeeded
Failure
The next time the system is reset, the File Transfer status field returns to
Ready.
After importing the configuration file, you can apply the configuration by
restoring the file from the restore point to which you saved it. See Restoring a
Saved Configuration.
4.7.6
Deleting a Configuration File
You can delete a saved configuration file from any of the system's three
restore points:
To delete a configuration file:
1 Select Platform > Configuration > Configuration Management. The
Configuration Management page opens (Figure 80).
2 In the File Number field, select the restore point that holds the
configuration file you want to delete.
3 Click Delete. The file is deleted.
