FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 48 of 597
Figure 17: Radio Parameters Page Per Carrier
– IP-20C
3 Set the radio frequency in the Frequency control (Local) section:
i In the TX Frequency (MHz) field, set the transmission radio frequency
in MHz.
ii In the RX Frequency (MHz) field, set the received radio frequency in
MHz.
iii Click Apply. The system automatically calculates and displays the
frequency separation in the TX to RX frequency separation (MHz)
field, based on the configured TX and RX frequencies.
iv Optionally, select Set also remote unit to apply the frequency settings
to the remote unit as well as the local unit.
