FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 79 of 597
3.4.2
Configuring a LAG Group
3.4.2.1 Creating a LAG Group
To create a LAG group:
1 Select Ethernet > Interfaces > Groups > LAG. The LAG page opens.
2 Click Create LAG underneath the Link Aggregation table. The Create LAG
Group page opens.
Figure 49: Create LAG Group
– Page 1
3 In the Group ID field, select a LAG Group ID. Only LAG IDs that are not
already assigned to a LAG group appear in the dropdown list.
4 In the LAG Member 1 field, select an interface to assign to the LAG group.
Only interfaces not already assigned to a LAG group appear in the
dropdown list.
5 Click Next. A new Create LAG Group page opens.
Figure 50: Create LAG Group
– Page 2
6 In the LAG Member 2 field, select an additional interface to assign to the
LAG Group.
7 To add additional interfaces to the LAG group, repeat steps 5 and 6.
8 When you have finished adding interfaces to the LAG group, click Finish. A
new Create LAG Group page opens displaying all the interfaces you have
selected to include in the LAG group.
