FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 34 of 597
2.2.1
PC Setup
To obtain contact between the PC and the IP-20 unit, it is necessary to
configure an IP address on the PC within the same subnet as the IP-20 unit.
The default IP-20 IP address is 192.168.1.1. Set the PC address to e.g.
192.168.1.10 and subnet mask to 255.255.255.0. Note the initial settings
before changing.
Note:
The IP-20 IP address, as well as the password, should be
changed before operating the system. See Changing the
Management IP Address and Changing Your Password.
1 Select Control Panel > All Control Panel Items > Network and Sharing
Center.
2 Click Change the adapter settings.
3 Select Local Area Connection > Properties > Internet Protocol Version
4 (TCP/IP), and set the following parameters:
IP address: 192.168.1.10
Subnet mask 255.255.255.0
No default gateway
4 Click OK to apply the settings.
Figure 6: Internet Protocol Properties Window
