FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 304 of 597
3 In the Protocol Type field, select the file transfer protocol you want to use
(FTP or SFTP).
4 In the Server username field, enter the user name you configured in the
FTP server.
5 In the Server password field, enter the password you configured in the
FTP server. If you did not configure a password for your FTP user, simply
leave this field blank.
6 If the IP address family is configured to be IPv4, enter the IPv4 address of
the PC or laptop you are using as the FTP server in the Server IPV4
address field. See Defining the IP Protocol Version for Initiating
Communications.
7 If the IP address family is configured to be IPv6, enter the IPv6 address of
the PC or laptop you are using as the FTP server in the Server IPv6
address field. See Defining the IP Protocol Version for Initiating
Communications.
8 In the Path field, enter the directory path to which you are uploading the
files. Enter the path relative to the FTP user's home directory, not the
absolute path. To leave the path blank, enter //.
9 In the File Name field, enter the name you want to give to the exported
security log.
10 Click Apply to save your settings.
11 Click Upload. The upload begins.
The File transfer status field displays the status of any pending security log
upload. Possible values are:
Ready – The default value, which appears when no file transfer is in
progress.
File-in-transfer – The upload operation is in progress.
Success – The file has been successfully uploaded.
Failure – The file was not successfully uploaded.
The File transfer progress field displays the progress of any current security
log upload operation.
