FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 106 of 597
2 Select a trap manager and click Edit. The Trap Managers Edit page opens.
Figure 72: Trap Managers - Edit Page
3 Configure the trap manager parameters, as described in Table 16.
4 Click Apply, then Close.
Table 16: Trap Manager Parameters
Parameter
Definition
IPv4 Address
If the IP address family is configured to be IPv4, enter the destination IPv4
address. Traps will be sent to this IP address. See Defining the IP Protocol
Version for Initiating Communications.
IPv6 Address
If the IP address family is configured to be IPv6, enter the destination IPv6
address. Traps will be sent to this IP address. See Defining the IP Protocol
Version for Initiating Communications.
Description
Enter a description of the trap manager (optional).
Admin
Select Enable or Disable to enable or disable the selected trap manager.
Community
Enter the community string for the SNMP read community.
Port
Enter the number of the port through which traps will be sent.
Heartbeat Period
Enter the interval, in minutes, between each heartbeat trap.
CLLI
Enter a Common Language Location Identifier (CLLI). The CLLI is free text
that will be sent with the trap. You can enter up to 100 characters.
