FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 71 of 597
9 For each interface or XPIC group, configure the following radio
parameters.
i In the TX Frequency (MHz) field, set the transmission radio frequency
in MHz.
ii In the RX Frequency (MHz) field, set the received radio frequency in
MHz.
iii In the TX Level (dBm) field, enter the desired TX signal level (TSL).
The range of values depends on the frequency and RFU type.
iv To mute the TX output of the RFU, select On in the TX mute field. To
unmute the TX output of the RFU, select Off.
10 Click Next. The Radio MRMC Script Configuration page opens. You can
configure the MRMC script parameters for each interface. For an XPIC
group, you configure the parameters for the group rather than the
individual interfaces.
Figure 40: 2 + 0 Multi Carrier ABC Quick Configuration Wizard
– Radio MRMC Script
Configuration Page
Figure 41: 2 + 0 Multi Carrier ABC Quick Configuration Wizard
– Radio MRMC Script
Configuration Page - XPIC
