FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 37 of 597
3 In the New password field, enter a new password. If Enforce Password
Strength is activated (see Configuring the Password Security Parameters),
the password must meet the following criteria:
Password length must be at least eight characters.
Password must include characters of at least three of the following
character types: lower case letters, upper case letters, digits, and
special characters. For purposes of meeting this requirement, upper
case letters at the beginning of the password and digits at the end of
the password are not counted.
A password cannot be repeated within five changes of the password.
4 Click Apply.
In addition to the Admin password, there is an additional password protected
user account, “root user”, which is configured in the system. The root user
password and instructions for changing this password are available from
Ceragon Customer Support. It is strongly recommended to change this
password.
2.5
Configuring In-Band Management
You can configure in-band management in order to manage the unit remotely
via its radio and/or Ethernet interfaces.
Each IP-20C unit includes a pre-defined management service with Service ID
257. The management service is a multipoint service that connects the two
local management ports and the network element host CPU in a single service.
In order to enable in-band management, you must add at least one service
point to the management service, in the direction of the remote site or sites
from which you want to access the unit for management.
For instructions on adding service points, see Configuring Service Points.
2.6
Changing the Management IP Address
Related Topics:
Defining the IP Protocol Version for Initiating Communications
