FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 248 of 597
3 In the Admin field, select from the following options to define how the
LLDP protocol operates for this port:
TX Only – LLDP agent transmits LLDP frames on this port but does not
update information about its peer.
RX Only – LLDP agent receives but does not transmit LLDP frames on
this port.
TX and RX – LLDP agent transmits and receives LLDP frames on this
port (default value).
Disabled – LLDP agent does not transmit or receive LLDP frames on
this port.
4 In the Notification Enable field, select from the following options to
define, on a per agent basis, whether or not notifications from the agent to
the NMS are enabled:
True – The agent sends a Topology Change trap to the NMS whenever
the system information received from the peer changes.
False – Notifications to the NMS are disabled (default value).
5 Click Apply, then Close.
Table 51 lists and describes the status parameters in the LLDP Port
Configuration page.
Table 51: LLDP Port Configuration Status Parameters
Parameter
Definition
Interface Location
Identifies the port.
Destination Address
The destination address of the LLDP agent associated with this port.
TLV TX
Indicates which of the unit's capabilities is transmitted by the LLDP agent for the
port:
PortDesc
–
The LLDP agent transmits Port Description TLVs.
SysName
–
The LLDP agent transmits System Name TLVs.
SysDesc
–
The LLDP agent transmits System Description TLVs.
SysCap
–
The LLDP agent transmits System Capabilities TLVs.
