Ceragon FibeAir IP-20C User Manual Download

Page: 261 / 597

FibeAir IP-20C/S/E

User Guide

Ceragon Proprietary and Confidential

Page 261 of 597

Synchronization

This section includes:



Configuring SyncE Regenerator

Note:

The Sync Source and Outgoing Clock pages are reserved for
future use.

9.1

Configuring SyncE Regenerator

Note:

SyncE Regenerator is supported for IP-20C and IP-20S. For
IP-20E, SyncE Regenerator support is planned for future

release.

In SyncE PRC pipe regenerator mode, frequency is transported between two

interfaces through the radio link.
With the system acting as a simple link, no distribution mechanism is

necessary, resulting in improved frequency distribution performance with
PRC quality and a simplified configuration.
Notes:

SyncE Regenerator currently supports only a single pipe

configuration.

To add a pipe configuration:
1 Select Sync > SyncE Regenerator. The SyncE Regenerator page opens.

Figure 196: SyncE Regenerator Page

2 Click Add underneath the Pipe Configurations Table. The Pipe

Configuration - Add window opens.

Summary of Contents for FibeAir IP-20C





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FibeAir IP-20C

Reviews:

Related manuals for FibeAir IP-20C

Brands by name

Popular brands

Ceragon FibeAir IP-20C, User Manual

Search results

Summary of Contents for FibeAir IP-20C

Reviews:

Related manuals for FibeAir IP-20C

Brands by name

Popular brands