FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 56 of 597
2.13.2
Enabling FIPS Mode
To set the unit to operate in FIPS mode:
1 Select Platform > Security > General > Configuration. The Security
General Configuration page opens.
Figure 23: Security General Configuration Page
2 In the FIPS admin configuration field, select Enable.
3 Click Apply.
Note:
Changing the FIPS configuration causes a unit reset.
After enabling FIPS:
The MD5 option for SNMPv3 is blocked.
After any system reset, the length of time before users can log back into
the system is longer than usual due to FIPS-related self-testing.
For a full list of FIPS requirements, including software configuration
requirements, refer to the Ceragon IP-20 FIPS 140-2 Security Policy, available
upon request.
2.14
Configuring Grouping (Optional)
At this point in the configuration process, you should configure any interface
groups that need to be set up according to your network plan. For details on
available grouping and other configuration options, as well as configuration
instructions, see System Configurations.
