FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 245 of 597
8.2.3
Configuring the General LLDP Parameters
This section explains how to define the general LLDP parameters for the unit.
For instructions on defining port-specific parameters, see Configuring the
LLDP Port Parameters.
Note:
The management IP address advertised by the local element
depends on the IP protocol (IPv4 or IPv6) configured for the
unit. See Defining the IP Protocol Version for Initiating
Communications.
To display and configure the general LLDP parameters for the unit:
1 Select Ethernet > Protocols > LLDP > Advanced > Configuration >
Parameters. The LLDP Configuration Parameters page opens.
Figure 182: LLDP Configuration Parameters Page
2 Modify the configurable parameters, described in Table 50.
3 Click Apply.
Table 49 lists and describes the status parameters in the LLDP Configuration
Parameters page.
