FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 159 of 597
Table 32 describes the capacity and throughput PMs.
Note:
To display the same parameters for a specific interval in a
separate page, select the interval in the PM table and click
View.
Table 32: Capacity/Throughput PMs
Parameter
Definition
Time interval index
For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Peak capacity (Mbps)
Displays the highest L1 bandwidth, in Mbps, sent through the selected radio
during the measured time interval.
Average capacity (Mbps)
Displays the average L1 bandwidth, in Mbps, during the measured time
interval.
Seconds exceeding Threshold
Displays the number of seconds during the measured time interval during
which the L1 bandwidth exceeded the configured capacity threshold.
Peak throughput (Mbps)
Displays the highest throughput, in Mbps, that occurred for the selected
radio during the measured time interval.
Average throughput (Mbps)
Displays the average throughput, in Mbps, for the selected radio during the
measured time interval.
Seconds exceeding Threshold
Displays the number of seconds during the measured time interval during
which the throughput exceeded the configured throughput threshold.
Integrity
Indicates whether the values received at the time and date of the measured
interval are reliable. An x in the column indicates that the values are not
reliable due to a possible power surge or power failure that occurred at that
time.
