FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 315 of 597
all members of the group. Radio-level diagnostics can still be
performed on individual members of the group.
Figure 242: Radio Loopbacks
– Edit Page
3 In the Loopback timeout (minutes) field, enter the timeout, in minutes,
for automatic termination of the loopback (0-1440). A value of 0 indicates
that there is no timeout.
4 In the RF loopback field, select On.
5 Click Apply.
11.5.2
Performing Ethernet Loopback
Ethernet loopbacks can be performed on any logical Ethernet interface except
a LAG. When Ethernet loopback is enabled on an interface, the system loops
back all packets ingressing the interface. This enables loopbacks to be
performed over the link from other points in the network.
To perform Ethernet loopback:
1 Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces
page opens (Figure 140).
2 Select an interface in the Ethernet Logical Port Configuration table and
click Loopback. The Logical Interfaces – Loopback page opens.
