FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 342 of 597
Parameter
Input Type
Permitted Values
Description
port
Number
GbE 1: 1
GbE 2: 2
GbE 3: 3
Radio Carrier 1: 1
Radio Carrier 2 (IP-20C only): 2
The specific interface you want to
enable or disable.
admin
Variable
up
down
Enter up to enable the interface
or down to disable the interface.
Examples
The following command enables Ethernet port 2:
root> platform if-manager set interface-type ethernet slot 1
port 2 admin up
The following command enables radio interface 1:
root> platform if-manager set interface-type radio slot 2 port
1 admin up
The following command disables radio interface 1:
root> platform if-manager set interface-type radio slot 2 port
1 admin down
The following command disables Ethernet port 3:
root> platform if-manager set interface-type ethernet slot 1
port 3 admin down
13.11
Configuring the Radio Parameters (CLI)
In order to establish a radio link, you must:
Enter radio view.
Unmute the radio carrier.
Configure the radio frequencies.
Configure the TX level.
13.11.1
Entering Radio View (CLI)
To view and configure radio parameters, you must first enter the radio’s view
level in the CLI.
To enter a radio’s view level, enter the following command in root view:
root> radio slot <slot> port <port>
Table 73: Entering Radio View CLI Parameters
Parameter
Input Type
Permitted Values
Description
slot
Number
2
