FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 467 of 597
18.1.7
Configuring a Default CoS (CLI)
You can define a default CoS value for frames passing through the interface.
This value can be overwritten on the service point and service level. The Color
is assumed to be Green.
To define a default CoS value for an interface, go to interface view for the
interface and enter the following command:
eth type eth [x/x]>classification set default-cos <default-cos>
To display the default CoS value for an interface, go to interface view for the
interface and enter the following command:
eth type eth [x/x]>classification show default-cos
Table 165: Default CoS CLI Parameters
Parameter Input Type Permitted Values Description
default-cos
Number
0
–
7
Enter the default CoS value for frames passing through the
interface. This value can be overwritten on the service point
and service level.
Example
The following command sets the default CoS for GbE 1 as 7:
eth type eth [1/1]>classification set default-cos 7
18.1.8
Configuring Ingress Path Classification on a Service Point (CLI)
For instruction on configuring ingress path classification on a service point,
see CoS Preservation and Modification on a Service Point (CLI).
18.1.9
Configuring Ingress Path Classification on a Service (CLI)
For instruction on configuring ingress path classification on a service, see
Configuring a Service’s CoS Mode and Default CoS (CLI).
