FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 343 of 597
Parameter
Input Type
Permitted Values
Description
port
Number
Radio Carrier 1: 1
Radio Carrier 2 (IP-20C only): 2
The specific radio carrier you
want to access.
Examples
The following command enters radio view for radio carrier 1:
root> radio slot 2 port 1
The following prompt appears:
radio[2/1]>
13.11.2
Muting and Unmuting a Radio (CLI)
To mute or unmute the radio, enter the following command in radio view:
radio[x/x]>rf mute set admin <admin>
To display the mute status of a radio, enter the following command in radio
view:
radio[x/x]>rf mute show status
Table 74: Radio Mute/Unmute CLI Parameters
Parameter
Input Type
Permitted Values
Description
admin
Variable
on
off
Mutes (on) or unmutes (off) the
radio.
Examples
The following command mutes radio carrier 1:
radio[2/1]>rf mute set admin on
The following command unmutes radio carrier 2 in an IP-20C unit:
radio[2/2]>rf mute set admin off
13.11.3
Configuring the Transmit (TX) Level (CLI)
To set the transmit (TX) level of a radio, enter the following command in radio
view:
radio[x/x]>rf set tx-level <tx-level>
To display the maximum transmit (TX) level of a radio, enter the following
command in radio view:
radio[x/x]>rf show max-tx-level
Table 75: Radio Transmit (TX) Level CLI Parameters
Parameter
Input Type
Permitted Values
Description
tx-level
Number
IP-20C and IP-20S units: -1 to 22
IP-20E units: -1 to 12
The desired TX signal level
(TSL), in dBm.
