Ceragon FibeAir IP-20C, User Manual

Page: 166 / 597

FibeAir IP-20C/S/E User Guide
Ceragon Proprietary and Confidential Page 166 of 597
Figure 117: Ethernet Services Page
Table 35 describes the parameters displayed in the Ethernet Services page.
Table 35: Ethernet Services Page Parameters
Parameter Definition
Services ID A unique ID for the service.
Service Type The service type:

MP – Multipoint

P2P – Point-to-Point

MNG – Management
Service sub type Indicates the type of service (Ethernet).
EVC ID The Ethernet Virtual Connection (EVC) ID. This parameter does not affect
the network element’s behavior, but is used by the NMS for topology
management.
EVC description The Ethernet Virtual Connection (EVC) description. This parameter does not
affect
the network element’s behavior, but is used by the NMS for topology
management.
Admin Indicates whether the service is enabled (Operational) or disabled
(Reserved). You can configure services for later use by defining the service
as Reserved. In Reserved mode, the service occupies system resources
but is unable to transmit and receive data.
6.1.4
Adding an Ethernet Service
To add an Ethernet service:
1 Select Ethernet > Services. The Ethernet Services page opens
(Figure 117).
2 In the Ethernet Services page, click Add. The Ethernet Services – Add page
opens.