Ceragon FibeAir IP-20C User Manual Download

Page: 358 / 597

FibeAir IP-20C/S/E

User Guide

Ceragon Proprietary and Confidential

Page 358 of 597

Note:

XPIC support is indicated by an X in the script name. For
example, mdN_A2828X_111_1205 is an XPIC-enabled script.

mdN_A2828N_130_100 is not an XPIC-enabled script. For a

list of XPIC support-enabled scripts, refer to the most recent
FibeAir IP-20C/S/E Release Notes.

3 Create an XPIC group. See Creating an XPIC Group (CLI).

14.4.4

Creating an XPIC Group (CLI)

To create an XPIC group, enter the following commands:

root> radio-groups

radio-groups>

radio-groups> xpic set admin enable

To disable XPIC, enter the following commands:

root> radio-groups

radio-groups>

radio-groups> xpic set admin disable

14.5

Configuring HSB Radio Protection (CLI)

This section explains how to configure HSB radio protection and includes the

following topics:



HSB Radio Protection Overview (CLI)



Configuring HSB Radio Protection (CLI)



Configuring 2+2 HSB Protection on an IP-20C Unit (CLI)



Viewing the Configuration of the Standby unit (CLI)



Editing Standby Unit Settings (CLI)



Viewing Link and Protection Status and Activity (CLI)



Manually Switching to the Standby Unit (CLI)



Disabling Automatic Switchover to the Standby Unit (CLI)



Disabling Unit Protection (CLI)

14.5.1

HSB Radio Protection Overview (CLI)

IP-20C and IP-20S support 1+1 HSB radio protection. IP-20C also supports

2+2 HSB radio protection. In HSB radio protection, one IP-20 operates in
active mode and the other operates in standby mode. If a protection

switchover occurs, the Active unit goes into standby mode and the Standby

unit goes into active mode.



For a full explanation of 1+1 HSB radio protection and 2+2 HSB radio
protection support in IP-20C, refer to the IP-20C Technical Description.



For a full explanation of 1+1 HSB radio protection support in IP-20S, refer
to the IP-20S Technical Description.

Summary of Contents for FibeAir IP-20C





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FibeAir IP-20C

Reviews:

Related manuals for FibeAir IP-20C

Brands by name

Popular brands

Ceragon FibeAir IP-20C, User Manual

Search results

Summary of Contents for FibeAir IP-20C

Reviews:

Related manuals for FibeAir IP-20C

Brands by name

Popular brands