FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 175 of 597
Parameter
Definition
CoS Mode
Indicates how the service point handles the CoS of frames that pass through the
service point. Options are:
sp-def-cos
–
The service point re-defines the CoS of frames that pass through
the service point, according to the Default CoS (below). This decision can be
overwritten on the service level.
Interface-Decision
–
The service point preserves the CoS decision made at the
interface level. The decision can still be overwritten at the service level.
PCL
–
Reserved for future use.
TCAM
–
Reserved for future use.
Default CoS
The default CoS. If the CoS Mode is sp-def-cos, this is the CoS assigned to frames
that pass through the service point. This decision can be overwritten at the service
level. Possible values are 0 to 7.
Ethernet Service Points
– Egress Attributes
Select Egress in the Ethernet Service Points page to display the Ethernet
Service Points – Egress Attributes table. Table 39 `describes the parameters
displayed in the General SP Attributes table.
Figure 122: Ethernet Service Points Page
– Egress Attributes
Table 39: Service Point Egress Attributes
Parameter
Definition
Service point ID
This ID is unique within the service. For Point-to-Point and Multipoint services, the
range of values is 1-32. For Management services, the range of values is 1-30.
Service point name
A descriptive name for the service point (optional). The Service Point Name can be
up to 20 characters.
Service point type
The service point type. Options are:
SAP
–
Service Access Point.
SNP
–
Service Network Point.
MNG
–
Management service point.
PIPE
–
Pipe service point.
