FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 174 of 597
Ethernet Service Points
– Ingress Attributes
Select Ingress in the Ethernet Service Points page to display the Ethernet
Service Points – Ingress Attributes table. Table 38 describes the parameters
displayed in the Ingress SP Attributes table.
Figure 121: Ethernet Service Points Page
– Ingress Attributes
Table 38: Service Point Ingress Attributes
Parameter
Definition
Service point ID
This ID is unique within the service. For Point-to-Point and Multipoint services, the
range of values is 1-32. For Management services, the range of values is 1-30.
Service point name
A descriptive name for the service point (optional). The Service Point Name can be
up to 20 characters.
Service point type
The service point type. Options are:
SAP
–
Service Access Point.
SNP
–
Service Network Point.
MNG
–
Management service point.
PIPE
–
Pipe service point.
Learning admin
Determines whether MAC address learning for incoming frames is enabled (Enable)
or disabled (Disable). When enabled, the service point learns the source MAC
addresses of incoming frames and adds them to a MAC address forwarding table.
Allow flooding
Determines whether incoming frames with unknown MAC addresses are forwarded
to other service points via flooding. Select Allow to allow flooding or Disable to
disable flooding.
Allow broadcast
Indicates whether frames with a broadcast destination MAC address are allowed to
ingress the service via this service point. Select Allow to allow broadcast or Disable
to disable broadcast.
