FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 184 of 597
6.3
Configuring Ethernet Interfaces
Related Topics:
Enabling the Interfaces (Interface Manager)
Configuring Ethernet Service(s)
The IP-20’s switching fabric distinguishes between physical interfaces and
logical interfaces. Physical and logical interfaces serve different purposes in
the switching fabric. In some cases, a physical interface corresponds to a
logical interface on a one-to-one basis. For some features, such as LAG, a group
of physical interfaces can be joined into a single logical interface.
The basic interface characteristics, such as media type, port speed, duplex, and
auto-negotiation, are configured for the physical interface via the Physical
Interfaces page. Ethernet services, QoS, and OAM characteristics are
configured on the logical interface level.
To configure the physical interface parameters:
1 Select Ethernet > Interfaces > Physical Interfaces. The Physical
Interfaces page opens.
Figure 127: Physical Interfaces Page
