FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 161 of 597
Figure 115: Ethernet Radio Utilization Threshold Page
2 Enter the utilization threshold you want, in % (1-100). The default value
for is 100.
3 Click Apply, then Close.
Table 33 describes the capacity and throughput PMs.
Note:
To display the same parameters for a specific interval in a
separate page, select the interval in the PM table and click
View.
Table 33: Utilization PMs
Parameter
Definition
Time interval index
For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Peak utilization (%)
Indicates the highest utilization of the radio capacity that occurred for the
selected radio or group during the measured time interval.
Average utilization (%)
Indicates the average utilization of the radio capacity for the selected radio
or group during the measured time interval.
Seconds exceeding Threshold
Displays the number of seconds during the measured time interval during
which the L1 bandwidth exceeded the configured utilization threshold.
Integrity
Indicates whether the values received at time and date of the measured
interval are reliable. An x in the column indicates that the values are not
reliable due to a possible power surge or power failure that occurred at that
time.
5.6.9.3 Displaying Frame Error Rate PMs
To display frame error rate PMs per radio or Multi-Carrier ABC group:
1 Select Radio > PM & Statistics > Traffic > Frame error rate. The Frame
error rate PM report page opens.
