FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 326 of 597
Enabling Local MEPs
Once you have added a MEP and defined it as a local MEP, you must enable the
MEP.
To enable a MEP:
1 In the SOAM MEP page (Figure 250), select the MEP you want to enable.
2 Click Edit. The SOAM MEP - Edit page opens.
Figure 254: SOAM MEP - Edit Page
3 In the MEP Active field, select True.
4 In the MEP CCM TX Enable field, select True.
5 In the CCM and LTM Priority field, select the p-bit that will be included in
CCMs sent by this MEP (0 to 7). It is recommended to select 7.
6 Click Apply, then Close.
