FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 323 of 597
2 Click Add. The Add MEP page opens.
Figure 249: Add MEP Page
3 In the MEP ID field, enter a MEP ID (1-8191).
4 Click Apply, then Close.
Configuring the Local MEPs
Once you have added local and remote MEPs, you must define the MEPs and
determine which are the local MEPs:
1 Select Ethernet > Protocols > SOAM > MEP. The SOAM MEP page opens.
Table 66 lists and describes the parameters displayed in the SOAM MEP
page.
Figure 250: SOAM MEP Page
Note:
To display MEPs belonging to a specific MEG, select the MEG
in the Filter by MA/MEG field near the top of the SOAM
MEP page. To display all MEPs configured for the unit, select
All.