FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 213 of 597
7.3.3.2 Assigning Multicast Policers
To assign a policer for multicast traffic to a logical interface:
1 Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces
page opens (Figure 140).
2 Select the interface in the Ethernet Logical Port Configuration table and
click Policers. The Policers page opens. By default, the Policers page opens
to the Unicast Policer table (Figure 152).
3 Select Multicast Policer. The Multicast Policer table appears.
Figure 153: Logical Interfaces
– Policers Page – Multicast Policer
4 In the Policer profile field, select a profile from the policer profiles
defined in the system. The Policer profile drop-down list includes the ID
and description of all defined profiles.
5 In the Multicast admin field, select Enable to enable policing on multicast
traffic flows from the logical interface, or Disable to disable policing on
multicast traffic flows from the logical interface.
6 Click Apply.
7.3.3.3 Assigning Broadcast Policers
To assign a policer for broadcast traffic to a logical interface:
1 Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces
page opens (Figure 140).
2 Select the interface in the Ethernet Logical Port Configuration table and
click Policers. The Policers page opens. By default, the Policers page opens
to the Unicast Policer table (Figure 152).
3 Select Broadcast Policer. The Broadcast Policer table appears.
