FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 212 of 597
Figure 152: Logical Interfaces
– Policers Page – Unicast Policer (Default)
For a logical interface, you can assign policers to the following traffic flows:
Unicast Policer
Multicast Policer
Broadcast Policer
Ethertype Policers
7.3.3.1 Assigning Unicast Policers
To assign a policer for unicast traffic to a logical interface:
1 Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces
page opens (Figure 140).
2 Select the interface in the Ethernet Logical Port Configuration Table and
click Policers. The Policers page opens. By default, the Policers page opens
to the Unicast Policer table (Figure 152).
3 In the Policer profile field, select a profile from the policer profiles
defined in the system. The Policer profile drop-down list includes the ID
and description of all defined profiles.
4 In the Unicast admin field, select Enable to enable policing on unicast
traffic flows from the logical interface, or Disable to disable policing on
unicast traffic flows from the logical interface.
5 Click Apply.
