Ceragon FibeAir IP-20C, User Manual

Page: 422 / 597

FibeAir IP-20C/S/E User Guide
Ceragon Proprietary and Confidential Page 422 of 597
Table 121: Add Service Point CLI Parameters
Parameter Input Type
Permitted
Values Description
sp-type Variable sap
snp
pipe
mng

SAP - Service Access Point

SNP - Service Network Point

PIPE - Pipe service point

MNG - Management service point
int-type Variable all-to-one
dot1q
s-tag
bundle-c-tag
bundle-s-tag
qinq Determines which frames enter the service via
this service point, based on the frame's VLAN
tagging. Since more than one service point may
be associated with a single interface, frames are
assigned to the earliest defined service point in
case of conflict.

all-to-one - All C-VLANs and untagged
frames that enter the interface are classified
to the service point. Only valid for SAP
service point types.

dot1q - A single C-VLAN is classified to the
service point. Valid for all service point types.

s-tag - A single S- VLAN is classified to the
service point. Valid for SNP and MNG
service point types.

bundle-c-tag - A set of multiple C-VLANs is
classified to the service point. Only valid for
SAP service point types.

bundle-s-tag - A single S-VLAN and a set of
multiple C-VLANs are classified to the
service point. Only valid for SAP service
point types.

qinq - A single S-VLAN and C-VLAN
combination is classified to the service point.
Valid for SAP and MNG service point types.
sp-id Number 1-32 for P2P
and MP
services.
1-30 for MNG
services. This ID is unique within the service.
interface Variable eth
radio The Interface type for the service point:

eth - An Ethernet interface.

radio - A radio interface.
When you are defining the service point on a
group, such as a LAG, use the group parameter
instead of the interface parameter.