FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 54 of 597
To enable ACM with adaptive transmit power:
1 Select Radio > Radio Parameters. The Radio Parameters page opens.
For IP-20C units, the Radio Parameters page initially displays a table as
shown in Figure 16.
For IP-20S units and IP-20E units, a page appears, similar to Figure 17
(which shows an IP-20C page).
2 For IP-20C units, select the carrier in the Radio table (see Figure 16) and
click Edit. A separate Radio Parameters page opens. The page is essentially
identical to the IP-20E and IP-20S page, except for the addition of a Radio
location parameter.
Figure 22: Radio Parameters Page Per Carrier
– IP-20C
3 In the Adaptive TX power admin field, select Enable. The Adaptive TX
power operational status field should now indicate Up to indicate that
the feature is fully functional.
