FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 188 of 597
2 Click Delete. The interface pairs are removed from the Automatic state
propagation configuration table.
6.5
Viewing Ethernet PMs and Statistics
IP-20 stores and displays statistics in accordance with RMON and RMON2
standards. You can display various peak TX and RX rates (in seconds) and
average TX and RX rates (in seconds), both in bytes and in packets, for each
measured time interval. You can also display the number of seconds in the
interval during which TX and RX rates exceeded the configured threshold.
This section includes:
6.5.1
RMON Statistics
To view and reset RMON statistics:
1 Select Ethernet > PM & Statistics > RMON. The RMON page opens.
Figure 131: RMON Page
To clear the statistics, click Clear All at the bottom of the page.
To refresh the statistics, click Refresh at the bottom of the page.
