FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 193 of 597
6.5.3
Port RX Statistics
The Ethernet Port RX PM report page displays PMs that measure various peak
transmission rates (in seconds) and average RX rates (in seconds), both in
bytes and in packets, for each measured time interval.
The page also displays the number of seconds in the interval during which RX
rates exceeded the configured threshold.
This section includes:
Displaying Ethernet Port RX PMs
Enabling or Disabling Gathering of Port RX PM Statistics per Interface
Setting the Ethernet Port RX Threshold
6.5.3.1 Displaying Ethernet Port RX PMs
To display Ethernet Port RX PMs:
1 Select Ethernet > PM & Statistics > Port RX. The Ethernet Port RX PM
Report page opens.
Figure 136: Ethernet Port RX PM Report Page
2 In the Interface field, select the interface for which you want to display
PMs.
3 In the Interval Type field:
To display reports for the past 24 hours, in 15 minute intervals, select
15 minutes.
To display reports for the past month, in daily intervals, select 24
hours.
Table 43 describes the Ethernet RX port PMs.
